Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Delta Construction
We provide independent Delta construction service in Las Vegas, repairing and installing Delta faucets, shower valves, showerheads and trim with quality parts that fit the equipment and finishing methods that protect its surface. What sets our Delta work apart is familiarity with the valve platforms themselves – Monitor, MultiChoice and H2Okinetic lines – so temperature drift, hidden leaks and pressure loss get diagnosed rather than guessed at.
We are not affiliated with, authorized by or a dealer for Delta. We’re an independent service provider, and we say so plainly. That independence is why we can match the right part to the equipment in front of us instead of steering you toward whatever a manufacturer program rewards. Delta fixtures sit inside real bathroom remodels across Las Vegas, from the older ranch homes around Paradise Palms to the tract builds out in Summerlin and Henderson, and those two housing types ask very different things of a valve. Call (844) 629-1061 for a free estimate, and we’ll look at what you actually have.
Why Trust Las Vegas Construction Co for Your Delta Construction?
Our technicians have up to 8 years of experience, and a good share of that time gets spent on Delta fixtures because Delta is one of the most common names inside a Las Vegas bathroom. That matters most with cartridges and rough-in assemblies, where the difference between a part that fits and one that nearly fits shows up six months later as a drip inside the wall.
We work warranty-safe. When a Delta valve cartridge fails, we reach for OEM components whenever they’re available, because an exact-fit cartridge is what keeps the factory coverage intact and what seats correctly against the rough-in body. For discontinued trim or parts that aren’t critical to the valve’s function, a high-quality equivalent that meets or exceeds OEM specification is a reasonable path, and we’ll explain the trade-off before you decide. Our installers also understand that Delta finishes – the Brilliance and SpotShield surfaces on faucets and trim – are engineered to resist wear, and that abrasive cleaners and mineral buildup are what defeat them. We seal and install with that in mind rather than treating finish as an afterthought. Las Vegas Construction Co is licensed and insured, and every estimate is free and written line by line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Las Vegas
Delta makes a specific family of products, and those products fail in specific ways. Here’s what we’re called out for most often in Las Vegas bathrooms.
- Monitor valve cartridge wear. A Monitor 14 or 17 Series valve uses a cartridge to balance hot and cold. As that cartridge wears, you get temperature drift – the shower slowly runs hotter or colder – and sudden cold spikes when someone flushes a toilet or starts a washing machine. It’s the pressure-balance spool losing its ability to compensate, not a water heater problem, and it’s one of the most common calls we get.
- MultiChoice rough-in seal failure. The MultiChoice Universal rough-in valve is designed to let a trim and cartridge be swapped without opening the wall, which is exactly why a failed seal behind it is so frustrating: the leak hides behind tile. Mineral scale and years of pressure cycling break down the seal, and the first sign is often a soft spot in the drywall on the other side or a stain on the ceiling below.
- H2Okinetic showerhead pressure loss. Las Vegas water carries a heavy mineral load, and the flow restrictor inside an H2Okinetic showerhead is where that load collects. The head isn’t broken – it’s scaled shut. Pressure drops gradually, so homeowners often blame the whole plumbing system before anyone looks at the head.
- Finish pitting and peeling. Brilliance and SpotShield finishes handle everyday wear well until an abrasive cleanser, a scouring pad or a hard-water film sits on them. Once the finish pits, it can’t be polished back, and the trim needs replacing rather than cleaning.
- Faucet spout drips and handle stiffness. In the Classic and Foundations faucet lines, a dripping spout usually traces to a worn cartridge or seat, and a stiff handle to scale on the stem. Both are repairable, and the ceramic valving inside these faucets holds up far better than the seals around it.
Delta Parts & Our Repair-vs-Replace Approach
We use OEM Delta cartridges and valve components whenever they’re available. That’s the default, not a sales tactic: exact fit preserves your warranty coverage and seats the part the way the rough-in was machined to accept it. We don’t stock or carry genuine Delta parts, and we’re not a Delta dealer – we source what the job needs. For discontinued trim or non-critical pieces, a high-quality aftermarket equivalent is fine if it meets or exceeds OEM specification, and we’ll tell you when that’s the case.
Repair is usually the right call for a valve cartridge, a showerhead or trim. Replacing the whole valve only makes sense when the rough-in body itself is cracked or corroded past the point where cleaning will do any good, and that job means opening the wall. We’ll show you which situation you’re in before anything gets cut. Call (844) 629-1061 to schedule a free estimate and we’ll give you a written recommendation either way.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We identify the exact Delta platform first – Monitor 14 or 17, MultiChoice rough-in, which faucet line – because the cartridge and seals differ. Temperature swing gets tested against other fixtures in the house to confirm it’s the valve and not pressure.
- 2
Repair or install. Water off, trim and cartridge out, rough-in inspected for mineral buildup or cracks. New OEM cartridge and seals go in when that’s the fix. For a tub-to-shower conversion or new walk-in shower, we set the valve and rough-in so the trim can be serviced later without demolition.
- 3
Test. We run hot and cold under load, cycle other fixtures to check pressure balance, and watch the wall cavity for seepage before anything gets closed up.
- 4
Warranty. You get the parts documentation and the manufacturer warranty terms in writing. Ask about manufacturer warranty coverage on the Delta components we install and on our workmanship.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Las Vegas
We service and install Delta shower valves and their cartridges, including Monitor 14 and 17 Series and the MultiChoice Universal rough-in. We handle H2Okinetic showerheads, kitchen and bath faucets from the Classic and Foundations lines, and the trim and finish pieces that go with them. That work shows up most in our walk-in shower installation and tub-to-shower conversion scopes, where the valve gets set fresh and the trim gets chosen to survive daily use. We also install frameless glass shower enclosures, so the shower you planned around a Delta valve actually gets finished the way it should. We are an independent service provider – not authorized, certified or factory-trained by Delta.
We Also Service These Brands
Las Vegas Construction Co works across a broad product bench, not a single name. Alongside Delta, our bathroom and kitchen work draws on KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That range means you can keep a Delta shower valve and still get a coordinated room, with one contractor handling the fixture, the cabinetry and the countertop together.
FAQs – Delta Construction Service in Las Vegas
No. We are an independent Delta service provider, not affiliated with, authorized by or a Delta dealer. We repair, install and service Delta fixtures with quality parts that fit them, and our recommendations come from the job rather than a manufacturer program.
Yes, in most cases. The Monitor 14 and 17 Series valves are built so the cartridge comes out through the trim, and if the rough-in body is sound, a new OEM cartridge and seals restore pressure balance without opening the wall. If the body is cracked or heavily scaled, a MultiChoice rough-in replacement may be the better path. Call (844) 629-1061 for a free estimate.
Mineral scale collecting in the flow restrictor, almost always. Las Vegas water carries a heavy mineral load, and that’s the narrowest point in the head. Cleaning or replacing the head usually brings the pressure back – the plumbing behind it is rarely the cause.
Usually yes. A spout drip in the Classic or Foundations lines typically traces to a worn cartridge or seat, and the ceramic valving inside those faucets outlasts the seals around it. Replacing a cartridge costs far less than a new faucet. Call (844) 629-1061 to schedule a free estimate and we’ll tell you which repair makes sense.
Keep abrasive cleaners and scouring pads off the finish, and dry the trim after use where you can. Brilliance and SpotShield finishes resist wear well, but a hard-water film left sitting on them will eventually pit the surface – and once it pits, it can’t be polished back. A water softener helps the whole room, not just the finish.
Not when the work is done correctly with OEM components. Using exact-fit Delta cartridges and valve parts is what preserves coverage, which is why we reach for OEM whenever it’s available. Ask about manufacturer warranty coverage before work begins so you know exactly what’s protected.
A cartridge or showerhead swap is usually a short visit. A tub-to-shower conversion or walk-in shower install runs into days, depending on tile and glass. The written estimate lays out the schedule before we start.
Monitor 14 and 17 Series shower valves and cartridges, MultiChoice Universal rough-in valves, H2Okinetic showerheads, and Classic and Foundations faucet lines, plus the trim and finish pieces that go with them. All serviced and installed by us as an independent provider.
Typical estimated ranges for the bathroom scopes where Delta fixtures live are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,185 – $11,160 |
| Tub-to-Shower Conversion | $3,255 – $9,300 |
| Shower Replacement | $2,790 – $7,905 |
| Bathroom Vanity Installation | $745 – $2,790 |
A full bathroom remodel in Las Vegas typically runs $8,370 – $26,040, and a small bathroom remodel $4,650 – $11,160. Call (844) 629-1061 for an exact quote – estimates are free.
Book Your Delta Service in Las Vegas, NV
Whether it’s a Monitor cartridge replacement, a MultiChoice rough-in repair, or a full tub-to-shower conversion built around your Delta valve, we’ll diagnose it, quote it in writing, and do the work warranty-safe. Call (844) 629-1061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Las Vegas Construction Co.