Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose CWS Construction
We provide independent CWS construction and remodeling service in Las Vegas, and our CWS work starts with the cabinet box rather than the showroom samples. A CWS kitchen lives or dies on what’s happening inside and under those doors: box construction, drawer-glide rating, hinge adjustment, and how the surrounding countertops and backsplash tie into the run. Because we read the actual cabinet spec before we build anything around it, a Las Vegas CWS remodel fits the existing footprint instead of forcing generic stock boxes into it.
CWS (Cabinet Works/Wood) cabinetry has its own framing conventions, drawer-glide and hinge standards, and toe-kick and filler details. An independent remodeler has to understand those before adding cabinets, an island, or new countertops, or the existing units lose useful life the day the new work lands. We are an independent CWS service provider. We are not affiliated with, authorized by, or sponsored by CWS, and we don’t speak for the manufacturer. What we do is repair, install, and remodel around CWS cabinetry every week in this valley.
- Kitchen remodeling around existing CWS cabinetry without disturbing what’s still sound.
- Cabinet installation and refacing matched to your CWS line, door style, and finish.
- Quartz and granite countertops and backsplash scribed and set to CWS box conventions.
Call (844) 629-1061 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Las Vegas Construction Co for Your CWS Construction?
Our technicians have up to 8 years of experience with cabinet-driven kitchen work, and that experience shows up in the small decisions. A technician who knows CWS cabinetry checks the drawer-glide rating before recommending a wider drawer bank. They look at how the toe kick is attached before running a scribe line on a new side panel. They know that a shaker door that rubs at the top corner is usually a hinge and box-square issue, not a door defect, and that replacing the door alone won’t stop the rub.
We use quality parts that fit CWS equipment. Where the cabinet box is sound and only the face or hardware has failed, that means CWS replacement doors, drawer fronts, hinges, and glides so the finish stays in the same family. Color-matching a factory finish depends on the original line, and a generic aftermarket door in a close-but-not-quite paint reads wrong in daylight.
Warranty-safe service matters here too. Cutting into a CWS side panel or toe kick without sealing the raw edge is how a cabinet starts taking on moisture. We seal cut edges, re-shim cabinet runs that move, and install countertops and backsplash in a way that doesn’t stress the cabinet boxes underneath. Ask about manufacturer warranty coverage on the products going into your project before you sign anything. Living in Las Vegas, you’ll also want a remodeler who thinks about indoor humidity swings and what a dry desert summer does to a painted shaker door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Las Vegas
Most of the CWS complaints we hear in Las Vegas come down to two things: water and movement. Desert air is brutal on painted and stained finishes, and a sink base is the wettest spot in the house.
- Particle-board sink-base swelling. Water finds its way behind the sink or beside a dishwasher and the box swells. Once particle board has taken on water, the drawer glides go out of level and the drawer stops tracking. It’s the single most common reason a CWS drawer starts jumping the glide.
- Shaker doors with joint separation and finish cracks. CWS Hampton and Goshen shaker doors are built from stiles and rails, and those seams move with indoor humidity swings. In Las Vegas the indoor air drops very dry in summer and rises with winter activity, so the joint opens a hair and the finish cracks along the seam. Door rub at the top corner usually follows.
- Delaminating toe kicks and side panels. When a countertop or backsplash installer cuts or scribes into an MDF or particle-board toe kick or side panel and leaves the raw edge exposed, that edge wicks moisture and the veneer lifts. Sealing the cut is a five-minute step that prevents a five-year problem.
- Island and peninsula runs racking out of square. When flooring changes or a new countertop goes on, an island or peninsula cabinet run can twist if it isn’t re-shimmed and re-attached to the subfloor. Then the doors rub and the countertop seams pull.
- Painted and stained boxes losing color at the edges. The Select and Value-series painted and stained boxes can show wear and finish loss at high-touch edges and around the dishwasher opening, especially where a previous installer cut without sealing. A color-match touch-up depends on the original line, which is why the line matters when you reface.
A typical CWS kitchen complaint in Las Vegas is doors that drag and drawers that jump the glide after several summers of dry heat and winter humidity swings. The shaker doors have joint-separated and the sink-base particle-board box has swelled, which throws the glides out of level. A qualified local remodeler traces it to water exposure and cabinet-box movement, checks whether the box is salvageable, and either refaces with matching CWS doors and new glides or replaces the affected cabinets and re-levels the countertop and backsplash so the run stays square. That’s the diagnosis path we follow.
CWS Parts & Our Repair-vs-Replace Approach
We don’t stock, carry, or order OEM or genuine CWS parts, and we’re not a CWS dealer. What we do is source quality parts that fit CWS equipment: replacement doors, drawer fronts, hinges, and glides that match the cabinet box and the finish family you already have. When the box is sound and only the face or the hardware has failed, that’s the move. Color-matching a CWS door depends on the factory line, so we confirm the line before ordering anything.
When the box is swollen, delaminated, or badly out of square, honest repair-vs-replace advice usually favors new cabinet boxes. Patching particle board that has already taken on water is a patch that fails again in a season or two. We’ll tell you which side of that line your cabinets are on, in writing, before the estimate is final. Call (844) 629-1061 for a free estimate and a straight answer on repair versus replace.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We open the cabinet, check the box for swelling and square, look at the drawer-glide rating and hinge type, and measure the run so the new work fits the CWS footprint. We identify the CWS line so any replacement door matches the finish.
- 2
Repair or install. Repair means matching CWS doors, drawer fronts, hinges, and glides, sealing cut edges, and re-shimming the run. Install means new cabinet boxes, an island, or a peninsula set to the same conventions, with the toe kick and filler detailed to match.
- 3
Countertop and backsplash fit. Quartz and granite are scribed to the actual cabinet run, not the drawing, so the countertop sits flat and the backsplash lines stay clean.
- 4
Test and close-out. Every drawer and door gets cycled and adjusted. We check the countertop seams and the backsplash caulk line, and we walk you through what was done and what manufacturer warranty coverage applies to the products installed.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Las Vegas
We work on the CWS cabinet lines that show up in Las Vegas kitchens: the Hampton and Goshen shaker collections, the Bristol and Kenwood raised-panel lines, and the Select and Value-series painted and stained boxes. We also install and fit CWS quartz and granite vanity tops paired with their cabinet lines, which comes up often in bathroom remodels where the vanity cabinet and the top need to arrive as a set. Beyond cabinets we install quartz and granite countertops and backsplash, set kitchen islands, and handle full kitchen remodeling that keeps sound CWS boxes and replaces the ones that have failed. If your project is a bathroom vanity or a full kitchen, the cabinet spec is where we start.
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $13,020 – $41,850 |
| Small Kitchen Remodel | $8,370 – $18,600 |
| Cabinet Installation | $3,720 – $12,090 |
| Countertop Installation | $1,860 – $6,045 |
| Backsplash Installation | $745 – $2,325 |
| Kitchen Island Installation | $2,790 – $9,300 |
| Bathroom Vanity Installation | $745 – $2,790 |
These are typical estimated ranges for Las Vegas, not quotes. The written estimate sets the final price.
We Also Service These Brands
We’re not a single-brand shop. Alongside CWS cabinetry we work with KraftMaid and Wellborn cabinets, and we install Cambria, Silestone, and Caesarstone countertops. Fixtures come from Kohler, Moen, and Grohe when the project calls for them. That range matters when a CWS kitchen needs a countertop that isn’t in the CWS line, or a bathroom vanity that isn’t. You get one contractor and a materials conversation you can actually follow.
FAQs – CWS Construction Service in Las Vegas
No. We’re an independent CWS service provider and we are not affiliated with, authorized by, or sponsored by CWS. We repair, install, and remodel around CWS cabinetry using quality parts that fit it, and we don’t represent the manufacturer.
Usually, yes, if we can identify the CWS line and finish family. Color-matching depends on the factory line, so we confirm the line first. Where the box is sound, replacing the damaged Hampton or Goshen doors and the glides is often the cleanest fix. Call (844) 629-1061 for a free estimate.
It’s almost always two things together: a sink-base box that swelled from water and threw the glides out of level, plus shaker doors that joint-separated from dry-air humidity swings and started rubbing at the corner. Pull the drawer and look at the box bottom near the sink. If it’s swollen, that’s the cause. Call (844) 629-1061 and we’ll diagnose it on site.
Reface when the boxes are sound and square and only the faces and hardware have failed. Replace the boxes when they’re swollen, delaminated, or badly out of square, because patching particle board that’s already taken on water fails again. We’ll tell you which one you’re looking at in writing. Call (844) 629-1061 for a free estimate.
It fits if the peninsula run is square and re-shimmed and attached to the subfloor first. A countertop scribed to a twisted run will pull its seams later. We check the run before templating. Call (844) 629-1061 to get it measured.
Often yes, depending on what’s moving. Cabinet replacement alone may not need one, but moving plumbing, gas, or electrical usually does. Most cities require a permit for that kind of work, so ask Las Vegas’s building department what your scope triggers before work starts. Call (844) 629-1061 and we’ll walk through your scope with you.
A reface or a door and glide replacement is typically a short job; a full kitchen remodel runs weeks, not days. We give you a schedule with the written estimate. Call (844) 629-1061 to book.
Typical estimated ranges run $3,720 – $12,090 for cabinet installation and $13,020 – $41,850 for a full kitchen remodel, with countertop installation at $1,860 – $6,045. Those are estimates; the written estimate sets the final price. Call (844) 629-1061 for an exact quote, and estimates are free.
Not if the work is done to the cabinet’s intended spec and cut edges are sealed. Ask about manufacturer warranty coverage before work starts so you know what applies to your line. Call (844) 629-1061 with questions.
Book Your CWS Service in Las Vegas, NV
Whether your CWS kitchen needs a few matched doors and new glides or a full remodel around sound cabinet boxes, we start with the spec and give you a written line-item estimate before anything is ordered. Call (844) 629-1061 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Las Vegas Construction Co.