Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru construction service in Las Vegas for fiberglass and steel entry doors: fiberglass skin repair, slab and frame diagnosis, weatherstripping and sweep replacement, hinge work, finish restoration, and full door replacement when a slab is too far gone. What makes our Therma-Tru work different is desert-specific: we’ve worked on thousands of fiberglass and steel entry doors across the Las Vegas Valley, so we know how 110°F summers, relentless UV and heat cycling treat these doors and what it takes to fix them right. We are an independent provider, not affiliated with or authorized by Therma-Tru, and we say so plainly. More than a few homeowners call us after a dealer tells them they need a whole new door when what they needed was sweeps, hinges and a proper finish. Call (844) 629-1061 for a free estimate, and you’ll know exactly what’s going in before you sign anything.
Why Trust Las Vegas Construction Co for Your Therma-Tru Construction?
Our technicians have up to 8 years of experience, and a good share of that has been spent on Therma-Tru doors in this valley. That matters for a specific reason: Therma-Tru makes fiberglass and steel entry door systems, and those doors fail in ways that are particular to this climate. A technician who hasn’t worked on them will misread a sticking door as a hinge problem when the slab has actually taken a heat set. We know the difference.
We repair, install and service Therma-Tru equipment with quality parts that fit it. On any door we touch, we source genuine Therma-Tru replacement parts like hinges, sweeps and weatherstripping whenever they’re available, so the fit and function come out right the first time. When an aftermarket component meets or exceeds the original specification, we’ll use it and tell you why. Neither choice is a shortcut.
Warranty-safe practice is part of the job. Doors get adjusted, sealed and finished the way the manufacturer intends, so nothing we do gives anyone a reason to deny a claim. We’re licensed and insured, we put the details in writing, and we give you an honest read on repair versus replacement. That’s the accountability chain we want on every Las Vegas door we work on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Las Vegas
Las Vegas heat and sun stress fiberglass and steel doors in ways a manufacturer’s generic care page won’t fully prepare you for. Here are the five failures we see most, and what’s really behind each one.
- Sun-baked fiberglass skins that chalk, fade or crack. Years of intense UV exposure break down the gelcoat surface on a fiberglass door slab. You’ll notice a white powdery film on your hand after touching the south- or west-facing side, then color loss, then hairline cracks in the skin itself. Once the cracks open, moisture can find its way in, so this is one to catch early.
- Warped or delaminated slabs from heat cycling. A door that bakes in direct afternoon sun and cools overnight goes through thousands of expansion cycles. Over time the slab can bow slightly, which is why it starts dragging on the threshold or refuses to latch cleanly. Delamination, where the skin separates from the core, usually shows at the edges first.
- Weatherstripping and sweeps that harden and fail. The rubber and foam seals around a door don’t love 110°F summers. They harden, crack and pull away from the frame. That means dust blowing in during a wind event, daylight visible around the edges, and your cooling bill climbing. In Las Vegas this happens faster than most door guides suggest.
- Finish peeling or blistering on steel and fiberglass doors. South- and west-facing exposures take the worst of it. Paint and factory finishes blister when the substrate underneath moves or traps moisture, and peeling usually starts at the bottom rail where splash and dust collect.
- Sticking doors that aren’t a hinge problem at all. Homeowners often assume hinges when a door sticks. In Las Vegas it’s frequently the frame moving with expansive soils or a slab that’s taken a heat set. Adjusting hinges on a warped slab just masks the real issue for a season.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Parts choice decides whether a Therma-Tru repair lasts a season or a decade. We always go to genuine Therma-Tru replacement parts first for hinges, sweeps and weatherstripping, because those components are built to the door’s exact dimensions and tolerances. When we use an aftermarket part, it’s only because it meets or exceeds the original spec, and we’ll tell you that’s what we’re doing and why.
Repair versus replace comes down to the slab. If the skin is intact and the frame is plumb, new seals, hinges and a proper finish can bring a door back to full function. If the slab is warped or delaminated, no amount of hardware fixes it. We’ll show you what we’re seeing and give you a straight recommendation, not the most expensive option by default.
Typical estimated ranges for the broader exterior work that often comes up alongside a door project:
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,185 – $13,950 |
| Roof Repair | $370 – $1,675 |
| Roof Replacement | $7,440 – $18,600 |
These are estimates only. The written estimate sets the final price. Call (844) 629-1061 to schedule your free estimate.
Our Therma-Tru Service Process – Step by Step
Here’s how a typical Therma-Tru job runs, from the first look to the final check.
- 1
Diagnosis. We inspect the door slab for warping, delamination and skin cracks, check the frame for plumb and square, and look at how the door sits in the opening. We also check the hardware: hinges, lockset alignment, and how the door swings and latches.
- 2
Repair or install. Depending on what the diagnosis shows, we replace worn weatherstripping and sweeps, adjust or replace hinges, address finish issues, or install a new Therma-Tru slab or full door system. Parts are chosen to fit your specific door.
- 3
Test. We open and close the door through a full swing, check the latch and deadbolt engage cleanly, check for daylight gaps around the perimeter, and confirm the seals sit tight against the frame.
- 4
Warranty and handoff. We leave you with a clear written record of what was done, which parts were used, and what to watch for over the next few summers so the door keeps performing. Ask about manufacturer warranty coverage on any parts we install.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Las Vegas
We work on the kinds of Therma-Tru products homeowners actually have in this valley: fiberglass entry doors including the Classic-Craft® Fiber-Classic® and Fiber-Classic® lines, Smooth-Star® fiberglass doors, and the Therma-Tru Pulse™ series, plus steel entry doors. That covers single entry doors, door systems with sidelights, and slabs in retrofit situations. We install new Therma-Tru doors when a replacement makes more sense than a repair, and we service existing doors with the parts and finishing they need. What you get from us is work built to manufacturer spec, so the door performs the way it was designed to. We don’t claim to stock Therma-Tru products. Call (844) 629-1061 to talk through your door.
We Also Service These Brands
Therma-Tru is one door brand in a much wider scope. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across our kitchen and bath projects. That means one contractor from the curb to the kitchen, with the brands named before you sign the contract. You don’t have to manage a door installer, a roofer and a cabinet crew on separate schedules.
FAQs – Therma-Tru Construction Service in Las Vegas
Is Las Vegas Construction Co authorized by Therma-Tru? No. We are an independent Therma-Tru service provider and we are not affiliated with or authorized by the manufacturer. We repair, install and service Therma-Tru doors with quality parts that fit them, and we’re upfront about that status. Call (844) 629-1061 for a free estimate.
Do you use quality parts that fit Therma-Tru equipment? Yes. We source genuine Therma-Tru replacement parts like hinges, sweeps and weatherstripping whenever they’re available, and we use aftermarket components only when they meet or exceed the original specification. Every part is chosen to fit your specific door. Call (844) 629-1061 and we’ll walk you through what your door needs.
How long does Therma-Tru service take? Weatherstripping, sweep and hinge work is usually a single visit. Finish work or a slab repair can take longer depending on cure time in the heat, and a full door replacement is its own schedule. We’ll give you a real timeframe with the written estimate. Call (844) 629-1061 to get started.
What kinds of Therma-Tru products do you cover? Fiberglass entry doors including Classic-Craft® Fiber-Classic®, Fiber-Classic® and Smooth-Star® lines, Pulse™ series doors, and steel entry doors, plus the sidelights and door systems they’re part of. Call (844) 629-1061 to confirm your specific door.
Will service void my Therma-Tru warranty? Done correctly, service shouldn’t void your warranty. We install, adjust and finish Therma-Tru doors to manufacturer spec, which is exactly what preserves coverage. Ask about manufacturer warranty coverage on the parts we install, and keep our written record with your paperwork. Call (844) 629-1061 for a free estimate.
How much does Therma-Tru construction cost in Las Vegas? It depends on scope. A weatherstripping and hinge refresh costs far less than a full slab replacement, and typical estimated ranges for exterior work that often comes up alongside run $4,185 – $13,950 for window replacement, $370 – $1,675 for roof repair and $7,440 – $18,600 for roof replacement. The written estimate sets the final price. Call (844) 629-1061 for an exact quote – estimates are free.
Book Your Therma-Tru Service in Las Vegas, NV
A sticking door and a chalky finish are fixable before they turn into a slab replacement. We’re licensed and insured, we put the scope in writing, and we tell you the truth about repair versus replace. Call (844) 629-1061 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Las Vegas Construction Co.